Vector 4

Vector 4

Hydraulic Brake Fluid Dot 4

FMVSS No 116 DOT4 SAE J1704 ISO4925 Class 4 and JIS K2233
906802 Vector 4 500ml 0 5x


Rymax Vector DOT 4 brake fluid is a high performance brake and clutch fluid with a minimum boiling point of 260°C , exceeding SAE J1704 and meeting or exceeding United States Federal Motor Vehicle Safety Standard No. 116 DOT 4 specifications. Our brake fluid DOT 4 provides excellent corrosion protection and rubber seal compatibility. The Rymax Vector series are completely miscible with one another and are compatible with other approved DOT glycol ether and borate brake fluids. However, do not mix with silicone type or silicate ester type brake fluids.

Good brake fluid quality is essential for the system to operate under severe conditions. In service, the brake fluid absorbs moisture which causes a significant reduction in the boiling point of the brake fluid. A consequent risk of this is so-called vapour lock. The Rymax Vector DOT 4 exceeds the international standards specifying minimum values for the wet and dry boiling point. In doing so, we offer a substantial safety margin against water pick up.






  • High Boiling point minimising the risk of vapour lock under extreme conditions
  • Compatible with other brake fluid meeting DOT 3 and DOT 4 specification
  • Protection against corrosion and system failure due to its excellent corrosion inhibitors
  • Optimum viscosity leads to good response even in very cold temperatures and prevents leakages

Available in

size-icon-03l 0.3L
size-icon-05l 0.5L
Rymax Lubricants bruker informasjonskapsler for å sikre at du får den beste opplevelsen på nettstedet vårt. Les mer om hvordan vi bruker informasjonskapslene dine i vår erklæring om informasjonskapsler. 

Velg region